90
To set stapler settings:
1 From the application’s Print dialog box, access Properties. (Select Print from the File
menu and select
Properties).
2On the
Output tab, select Finisher (Face-down) from the Output to list.
3 Select the
Staple check box in the Finishing Options area. Select one of the following as
the stapling position:
Upper Left, Upper Right, or Booklet.
4Click
[...] on the right of the stapling position. The Staple Settings dialog box appears.
Specify the number of pages to staple by adjusting the arrows in the
Staple Count area.
• All Sheets (maximum of 50): Staples and outputs all pages of documents that have 50
pages or less. If the document being printed has 51 or more pages, it cannot be stapled.
For example, If the document being printed has 58 pages, it cannot be stapled.
• After every sheet(s): Parameter separates documents into sets with a specific number
of pages, then staples and outputs them. You can designate from 2 to 50 pages in each
stapled set. Even if there are fewer than the specified number of pages, the document
will be stapled. For example, if stapling has been specified for every 50 pages and a
To Next Page
Loading...
Need help?
General