2FM
1-1-2
Controller software ......................... a) Emulation
PCL6 (PCL5e+PCLXL)
KPDL3 (PostScript 3 compatible)
b) Fonts:
Bitmap font:
1 Line Printer bitmap font
Outline fonts:
35 PCL6 (PCL5e/PCL-XL) fonts
45 KPDL2 fonts:
c) Graphic:
(1) Raster graphic:
75, 100, 150, 200*, 300, 600* dpi
(*200 dpi is supported when the resolution is 600 dpi.)
(2) Vector graphic:
Line, Box, Circle, Arc, Fill pattern etc.
(3) Bar code:
One-dimensional bar code: 45 types
Two-dimensional bar code: 1 type (PDF-417)
d) Connectivity
Plug & play, Windows 95/98/Me/NT4.0/2000/XP
Interface ......................................... Parallel: High-speed (bi-directional), IEEE 1284 Nibble/ECP mode
USB: Full-Speed USB2.0
Optional interface (KUIO-LV) × 1: Network interface card IB-20 (10 Base-TX/100
Base-TX/10 Base-2), IB-21E (10 Base-TX/100 Base-TX), wireless LAN card IB-22
must be installed.
Optional serial interface: RS-232C (Max. 115.2 Kbps), Serial interface board IB-11
must be installed.
Dimensions .................................... 378 (W) × 235 (D) × 375 (H) mm
14
7
/
8
" (W) × 9
1
/
4
" (D) × 14
3
/
4
" (H)
Weight ............................................ Approx. 10.5 kg/23
1
/
8
lbs
Floor requirements ......................... 496 (W) × 740 (D) mm
19
9
/
16
" (W) × 29
3
/
16
" (D)
Power source ................................. 120 V AC, 60 Hz, 7.1 A
220 - 240 V AC, 50/60 Hz, 3.8 A
Power consumption ....................... Max.: 819 W
During sleep mode: 4.5 W (120 V AC), 4.2 W (220 - 240 V AC)
Noise .............................................. Printing: 55 dB(A)
Ready: 32 dB(A)
Options ........................................... Paper feeder, Additional memory (DIMM), Memory card, Network interface card
IB20/IB21E/IB-22, Serial interface board IB-11
To Next Page
Loading...
