2FM
1-6-10
(2) Removing the main board
1. Remove the process unit (See page 1-6-2).
2. Remove the top/face-down output tray and
right cover (See pages 1-6-2 and 1-6-3).
3. Remove two connectors from main board.
4. Remove six screws.
5. Remove the controller box (with main board).
Figure 1-6-11 Removing the controller box (with main board)
4
Connector
Screws
Screws
Connector
Screws
Controller box
(with main board)
To Next Page
Loading...
