Kyocera FS-1020D

2FM
1-7-1
Figure 1-7-1 Firmware program data format
1-7-1 Upgrading the firmware on the main board
Updating the system (controller) firmware is possible by downloading the firmware through the parallel interface or through
the memory card (CompactFlash). These firmware programs are directly overwritten in the system DIMM [KP-1050] (Flash
ROM type only) on the main board. The operator panel message in different languages can also be downloaded through the
parallel interface or through the memory card.
(1) Firmware program data format
Kyocera supplies the following types of data for updating firmware of the different purposes:
• System firmware
The data to be downloaded are supplied in the following format:
B11K8000.bcmp
Boot program is included.
ID code for Kyocera mita
Machine code:FS-1020D (B11)
compression
Version code: Version 80.00
System firmware file name example