Kyocera FS-1020D

2FM
1-5-7
Check procedures/corrective measures
No
No
Turn power switch on.
Turn power switch on.
Turn power switch on.
Turn power switch on.
Replace laser scanner
unit. See page 1-6-28.
OK?
Yes
OK?
Yes
No
OK?
Yes
No
OK?
Yes
End.
End.
B
Continued
from previous page.
Replace engine board
(KP-1046). See page 1-
6-9.
No
OK?
Replace engine board
(KP-1046). See page 1-
6-9.
Replace main board
(KP-1050). See page 1-
6-10.
No
Turn power switch on.
OK?
Yes
Yes
End.
End.
C
Continued
from previous page.
Replace main board
(KP-1050). See page 1-
6-10.
Replace harness
(2DC2714) between
engine board and laser
scanner unit.
Replace harness
(2FM2602) between main
board and engine board.
Replace harness
(2FM2602) between main
board and engine board.
Replace harness
(2DC2714) between
main board and laser
scanner unit.