2FM
1-6-17
10. Remove the main board (See page 1-6-10).
11. Remove one screw and then remove the grounding plate.
12. Remove one screw and then remove the feed clutch.
13. Remove three stop rings.
14. Remove MP feed clutch (gear), feed clutch (gear), and registration clutch (gear).
Figure 1-6-18 Removing the clutches
Stop ring
Stop ring
Feed clutch
(gear)
Registration clutch (gear)
Screw
Screw
Grounding
plate
Feed clutch
Stop ring
MP feed clutch (gear)
To Next Page
Loading...
