Kyocera FS-1124MFP

Scanning Image to USB
OPERATION GUIDE 6-3
6
Color / Grayscale / Black and White Selection
This feature allows you to select the select the color mode used for scanning when sending images. You can
select from Full Color, Grayscale or Black & White.
Use the procedure below to select the color mode when sending scanned images.
1 Press the Scan to USB key.
2 Press the U or V key to select [Store File].
3 Press the OK key. The basic screen appears.
4 Place the originals on the platen.
5 Press the Function Menu key. Function Menu
appears.
6 Press the U or V key to select [Color Selection].
7 Press the OK key. Color Selection appears.
8 Press the U or V key to select the desired color
mode.
9 Press the OK key.
Completed. is displayed and the screen returns to
the basic screen for scanning.
10 Specify the destination, and press the Start key to
start scanning.
NOTE: Press the Reset key to reset the settings
selected in Function Menu.
Function Menu: a b
*********************
2 Original Size T
3
Original Image T
[ Exit ]
1 Color Selection T
Color Selection: a b
*********************
2 Grayscale
3 Black & White
1 *Full Color