Scanning Image to USB
6-10 OPERATION GUIDE
Zoom
Scans the original by automatically zooming it depending on the scanning size.
The table below lists the available options.
NOTE: When Custom Size or Size Entry is selected as the original size, the originals are sent at normal size
and zooming cannot be used.
Depending on the combination of original size and storing size, the image is placed at the edge.
Use the procedure below to enlarge or reduce the original to match the transmission size.
1 Press the Scan to USB key.
2 Press the U or V key to select [Store File].
3 Press the OK key. The basic screen appears.
4
Place the originals on the platen.
5
Select the transmission size.
6
Press the Function Menu key. Function Menu
appears.
7
Press the U or V key to select [Zoom].
8
Press the OK key. Zoom appears.
9
Press the U or V key to select [100%] or [Auto]
and then press the OK key.
Completed. is displayed and the screen returns to
the basic screen for scanning.
Item Detail
100% No Zoom (to be scanned at actual size)
Auto Zoomed automatically according to the specified scanning size.
To Next Page
Loading...
