Kyocera FS-1124MFP

Scanning Image to USB
6-6 OPERATION GUIDE
Original Image
Select image quality suitable to the type of original. The table below shows the quality options.
Use the procedure below to select the quality when sending scanned originals.
1 Press the Scan to USB key.
2 Press the U or V key to select [Store File].
3 Press the OK key. The basic screen appears.
4 Place the originals on the platen.
5 Press the Function Menu key. Function Menu
appears.
6 Press the U or V key to select [Original Image].
7 Press the OK key. Original Image appears.
8 Press the U or V key to select the desired image
quality.
9 Press the OK key.
Completed. is displayed and the screen returns to
the basic screen for scanning.
10 Specify the destination, and press the Start key to
start scanning.
NOTE: Press the Reset key to reset the settings
selected in Function Menu.
Item Detail
Text+Photo Text and photos together.
Photo For photos taken with a camera.
Text Only text, no photos.
Function Menu: a b
*********************
2 Original Size T
3
Original Image T
[ Exit ]
1 Color Selection T
Original Image: a b
*********************
2 Photo
3 Text
1 *Text+Photo