Default Setting (System Menu)
8-78 OPERATION GUIDE
Address Number
Address Number is an ID for a destination. When creating a new destination, the smallest unused address
number is automatically allocated. You can select any available number out of 100 numbers for individuals and
20 numbers for groups.
1 Press the Y or Z key to display Address Number.
2 Press [Edit] (the Right Select key). An entry
screen appears.
3 Press the U or V key or the numeric keys to enter
the address number.
4 Press the OK key. The address number is
registered.
NOTE: If you enter an address number that is already
registered, the screen will display This address number
is already registered. and return to the screen of step 2.
Adding a Group
Compile two or more individuals into a group. Designations in the group can be added at the same time. When
adding a group, a maximum of 20 groups can be added in the Address Book.
NOTE: Before adding a group in the Address Book, the individuals to be included in the group must be added
first.
Use the procedure below to register a group.
1 In the Sys. Menu/Count. menu, press the U or V
key to select [Edit Destination].
To Next Page
Loading...
