Basic Operation
3-8 OPERATION GUIDE
Copying
Follow the steps as below for basic copying.
1 Press the Copy key when the Copy key/indicator
is off.
NOTE: If the Message Display is turned off, press the
Power key and wait for the machine to warm up.
2 Place the originals on the platen or in the document
processor.
NOTE: For loading instructions, refer to Loading
Originals on page 2-29.
3 The paper source for copying is the location
displayed on the panel.
4 Use the numeric keys to enter the copy quantity.
Specify the desired number up to 99.
5 Press the Start key to start copying.
6 Remove the finished copies from the top tray.
To Next Page
Loading...
