Scanning Image to USB
OPERATION GUIDE 6-19
6
File Name Entry
This setting allows you to assign a document name to scanned images. You can specify a default for the
document name.
Use the procedure below to assign names to scanned documents that you are sending.
1 Press the Scan to USB key.
2 Press the U or V key to select [Store File].
3 Press the OK key. The basic screen appears.
4 Place the originals on the platen.
5 Press the Function Menu key. Function Menu
appears.
6 Press the U or V key to select [File Name Entry].
7 Press the OK key. File Name Entry appears.
NOTE: Refer to Character Entry Method on Appendix-
2 for details on entering characters.
8 Enter the file name, press the OK key. Additional
Info. appears.
NOTE: Refer to Character Entry Method on Appendix-
2 for details on entering characters.
9 Enter the date, job number, etc. on the screen, and
then press the OK key.
NOTE: Refer to Character Entry Method on Appendix-
2 for details on entering characters.
Completed. is displayed and the screen returns to
the basic screen for scanning.
10 Specify the destination, and press the Start key to
start scanning.
To Next Page
Loading...
