Default Setting (System Menu)
OPERATION GUIDE 8-89
8
Restarting the System
Restart the printer without turning the main power
switch off. Use this to deal with any unstable operation
by the machine. (Same as the computer restart.)
Use the procedure below to restart the system.
1 In the Sys. Menu/Count. menu, press the U or V
key to select [System], and press the OK key.
2 A login screen will appear. Then, enter the login
user name and password with device administrator
privileges to log in, and press [Login] (the Right
Select key).
The default setting of login user name and
password is 2400.
3 The System menu appears.
4 Press the U or V key to select [Restart].
5 Press the OK key. A confirmation screen appears.
6 Press [Yes] (the Left Select key). The printer is
restarted.
If you press [No] (the Right Select key), the printer
does not restart and the screen returns to the
System menu.
To Next Page
Loading...
