Kyocera FS-1124MFP

Default Setting (System Menu)
8-26 OPERATION GUIDE
4 A login screen will appear. Then, enter the login
user name and password with device administrator
privileges to log in, and press [Login] (the Right
Select key).
The default setting of login user name and
password is 2400.
5 The Timer Settings menu appears.
6 Press the U or V key to select [Auto Err. Clear].
7 Press the OK key. Auto Err. Clear appears.
8 Press the U or V key to select [Off] or [On].
9 Press the OK key. Completed. is displayed and the
screen returns to the Timer Settings menu.
Error Clear Timer
If you select [On] for Auto Error Clear, set the amount of time to wait before automatically clearing errors. Options
are between 5 and 495 seconds (every five seconds). The default setting is 30 seconds.
If you set 0 as the time, errors are not displayed.
NOTE: If you select [Off] for Auto Error Clear, the time display does not appear.
Use the procedure below to set the automatic error clear delay.
1 In the Sys. Menu/Count. menu, press the U or V
key to select [Common Settings].
Login User Name: L b
********************
Login Password:
[ Login ]
Timer Setting: a b
*********************
2 PanelReset Timer
3 Low Power Timer
[ Exit ]
1 Sleep Timer
Auto Err. Clear: a b
*********************
2 On
1 *Off
Sys. Menu/Count.: a b
3 System
4 Administrator
*********************
[ Exit ]
5 Common Settings