Kyocera FS-1124MFP - Page 183

Default Setting (System Menu)
OPERATION GUIDE 8-37
8
4 Press the OK key. The Function Default menu
appears.
5 Press the U or V key to select [Scan Resolution].
6 Press the OK key. Scan Resolution appears.
7 Press the U or V key to select [200x100dpi
Norm.], [200x200dpi Fine], [200x400dpi S.Fin],
[300x300dpi], [400x400dpi U.Fin] or [600x600dpi].
8 Press the OK key. Completed. is displayed and the
screen returns to the Function Default menu.
Original Image
Set the default original document type. The available default settings are shown below.
Use the procedure below to select the default quality setting for originals.
1 In the Sys. Menu/Count. menu, press the U or V
key to select [Common Settings].
Function Default: a b
*********************
2 Scan Resolution
3 FAX Resolution
[ Exit ]
1 Color Selection
Scan Resolution: a b
3 200x400dpi S.Fin
*********************
5 400x400dpi U.Fin
4 *300x300dpi
Item Description
Text+Photo Text and photos together.
Photo For photos taken with a camera.
Text Only text, no photos.
for OCR Image quality suitable for OCR software.
Sys. Menu/Count.: a b
3 System
4 Administrator
*********************
[ Exit ]
5 Common Settings