Kyocera FS-1124MFP

Default Setting (System Menu)
OPERATION GUIDE 8-91
8
7 Press the OK key. USB Host appears.
8 Press the U or V key to select [Unblock] or [Block].
9 Press the OK key. Completed. is displayed and the
screen returns to the I/F Block Set. menu.
USB Device (USB interface setting)
This locks and protects the USB interface connector (B1) (USB Device). The default setting is Unblock.
Use the procedure below to specify the USB Device setting.
1 In the Sys. Menu/Count. menu, press the U or V
key to select [System], and press the OK key.
2 A login screen will appear. Then, enter the login
user name and password with device administrator
privileges to log in, and press [Login] (the Right
Select key).
The default setting of login user name and
password is 2400.
3 The System menu appears.
4 Press the U or V key to select [I/F Block Set.].
5 Press the OK key. The I/F Block Set. menu
appears.
6 Press the U or V key to select [USB Device].
USB Host: a b
*********************
2 Block
1 *Unblock
Sys. Menu/Count.: a b
1 Report
2 Counter
*********************
[ Exit ]
3 System
Login User Name: L b
********************
Login Password:
[ Login ]
System: a b
*********************
2 Restart
[ Exit ]
1 I/F Block Set.
I/F Block Set.: a b
1 USB Host
*********************
3 Option I/F
[ Exit ]
2 USB Device