Preparation before Use
2-20 OPERATION GUIDE
There is a paper gauge on the left side of the front
of the paper cassette to indicate the remaining
paper supply. When paper is exhausted, the pointer
will go down to the level of (empty).
NOTE: If the machine will not be used for a prolonged
period, protect all paper from humidity by removing it
from the cassette and sealing it in the paper storage
bag.
7 Select the media type (plain, recycled, etc.) loaded
in the cassette. (Refer to Specifying Paper Size
and Media Type for the Cassette on page 2-24.)
Loading Paper in the Manual Feed
The manual feed will hold 1 sheet of A4 or smaller plain paper (80 g/m
2
).
The manual feed accepts paper sizes from A4 to A6 and Hagaki and from Legal to Statement-R, and 16K. Be
sure to use the manual feed when you print on any special paper.
IMPORTANT: When using media types other than plain paper (such as recycled or colored paper), always
specify the media type setting. (Refer to Specifying Paper Size and Media Type for the Manual Feed on page
2-26.) If you are using a paper weight of 106 g/m
2
or more, set the media type to Thick.
NOTE: When you load custom size paper, enter the paper size by referring to Specifying Paper Size and
Media Type for the Manual Feed on page 2-26.
When you use special paper such as transparencies or thick paper, select the media type by referring to
Specifying Paper Size and Media Type for the Manual Feed on page 2-26.
1 Adjust the position of the paper guides on the
Manual Feed tray. Standard paper sizes are
marked on the Manual Feed tray. For standard
paper sizes, slide the paper guides to the
corresponding mark.
To Next Page
Loading...
