Options
ADVANCED OPERATION GUIDE 3-3
Expansion Memory Modules
To expand the printer memory for more complex print jobs and faster print
speed, you can plug in optional memory module (dual in line memory
module) in the memory slot provided on the printer main controller board.
You can select additional memory module from 64, 128, 256 or 512MB.
The maximum memory size is 640MB (FS-2000D, FS-3900DN: 576MB).
NOTE: The expansion memory should only be installed by your service
technician. We shall not be liable for any damages caused by improper
installation of expansion memory.
Precautions for handling the printer's main controller board and memory
module.
To protect electronic parts, discharge static electricity from your body by
touching a water pipe (faucet) or other large metal object before handling
the memory module. Or, wear an antistatic wrist strap, if possible, when
you install the memory module.
Always hold the main controller board or a memory module by its edges as
shown below to avoid damaging electronic parts.
Installing the Memory Module
1
Power off the printer and unplug the printer power cord.
2
Open the right cover and inner cover.
YES NO
To Next Page
Loading...
