Using the Operation Panel
2-52 ADVANCED OPERATION GUIDE
4
Press ? or @ repeatedly until >EcoPrint
Mode appears.
5
Press [OK]. A blinking question mark (?)
appears.
6
Select On or Off using the ? or @.
7
Press [OK].
8
Press [Menu]. The display returns to Ready.
Print Resolution
You can set the default print resolution in four ways: 300dpi, 600dpi, Fast
1200 mode and Fine 1200 mode. The clarity of printed characters and
graphics becomes sharper in this order.
1
Press [Menu].
2
Press ? or @ repeatedly until Print
Quality > appears.
3
Press B.
4
Press ? or @ repeatedly until
>Resolution appears.
5
Press [OK]. A blinking question mark (?)
appears.
6
Select Fine 1200 mode, Fast 1200 mode, 300 dpi or 600 dpi using
the ? or @.
7
Press [OK].
8
Press [Menu]. The display returns to Ready.
Print Density
The print density can be adjusted in five steps: from 01 (light) to 05 (dark).
The factory setting is 03.
>EcoPrint Mode
Off
>EcoPrint Mode
? Off
Print Quality >
>Resolution
Fast 1200 mode
>Resolution
? Fast 1200 mode
To Next Page
Loading...
