Using the Operation Panel
2-2 ADVANCED OPERATION GUIDE
General Information
This chapter provides the information you need to configure the Ecosys
printer. In general you need to use the operation panel only to make default
settings. You can make most changes to the printer settings using the
printer driver through the application software.
NOTE: Changes to printer settings made using a software application
override changes made using the operation panel.
You can also rely on other printer utilities such as KM-NET for Clients if you
need to change settings that are not available on the printer driver. It will
allow remote access to printer settings. Printer utilities are supplied in the
CD-ROM supplied with the printer.
The chapter describes the operation panel in detail, including its menus
and the procedures for changing various printer settings.
To Next Page
Loading...
