Kyocera FS-2000D User Manual

Using the Operation Panel
ADVANCED OPERATION GUIDE 2-63
Using USB Flash Memory
The USB flash memory is available for only PDF file. PDF files should be
stored on the root directory of USB flash memory. The PDF file name can
be up to 99 single-byte characters in length.
NOTE: The file name which is displayed on the message display can be
up to 16 characters.
Installing the USB flash memory into the printer allows you to perform the
following operations.
• Reading PDF file
• Removing the USB flash memory
• Printing a list of data names (partitions)
The operations of the USB flash memory are the same as those of the
CompactFlash card. Refer to the relevant sections in Using the
CompactFlash Card on page 2-54.
Removing the USB Flash Memory
1
Press [Menu].
2
Press ? or @ repeatedly until USB
memory > appears.
3
Press B.
4
Press ? or @ repeatedly until >Remove
Device appears.
5
Press [OK]. A question mark (?) appears.
6
Press [OK]. The display returns to Ready, and you can remove the USB
flash memory.
USB Memory >
>Remove Device
>Remove Device ?

Kyocera FS-2000D Specifications

General

Color	No
Duplex printing	Yes
Print technology	Laser
Maximum resolution	1200 x 1200 DPI
Time to first page (black, normal)	9 s
Print speed (black, normal quality, A4/US Letter)	30 ppm
Internal memory	64 MB
Maximum internal memory	576 MB
Total input capacity	500 sheets
Total output capacity	250 sheets
Maximum input capacity	1100 sheets
Media weight (tray 1)	60-120 gsm
Non-ISO print media sizes	Letter
ISO A-series sizes (A0...A9)	A4, A5
ISO B-series sizes (B0...B9)	B5
Maximum ISO A-series paper size	A4
Custom media sizes	148 x 210 mm - 216 x 356 mm
Power requirements	220 - 240 V
Networking features	Ethernet/Fast-Ethernet
Maximum duty cycle	150000 pages per month
Sustainability certificates	ENERGY STAR
Power consumption (standby)	9 W
Power consumption (printing)	400 W
Power consumption (PowerSave)	4 W
Certification	TÜV/GS, CE, PTS

Weight and Dimensions

Dimensions (WxDxH)	382 x 394 x 285 mm