Using the Operation Panel
ADVANCED OPERATION GUIDE 2-7
READY, DATA, and ATTENTION Indicators
The following indicators light during normal operation and whenever the
printer needs attention. Depending on the status of lighting, each indicator
has the following meaning:
VELLUM Vellum
†
ROUGH Rough paper
LETTERHD Letterhead
COLOR Colored paper
PREPUNCH Prepunched paper
ENVELOPE Envelope
†
CARDSTOCK Card stock
†
THICK Thick paper
†
HIGH QLT High-quality paper for color printing
CUSTOM 1 (to 8) Custom 1 (to 8)
†. Only with MP tray feeding
Indicator Description
Flashing. Indicates an error that you can resolve. For
details, refer to the Troubleshooting section in the
Operation Guide.
On. Indicates that the printer is ready and on-line. The
printer prints the data it receives.
Off. Indicates that the printer is off-line. Data can be
received but will not be printed until the printer is
switched on-line by pressing [GO]. Also, indicates
when printing is automatically stopped due to an error
condition. For details refer to the Troubleshooting
section in the Operation Guide.
Flashing. Indicates that a data is being received.
On. Indicates either that data received is being
processed before printing starts, or that data received
is being written to a CompactFlash card, Microdrive or
RAM disk.
Flashing. Indicates that the printer requires
maintenance or is warming up.
On. Indicates the occurrence of a problem or an error.
For details, refer to the Troubleshooting section in the
Operation Guide.
To Next Page
Loading...
