Using the Operation Panel
2-72 ADVANCED OPERATION GUIDE
Depending on the binding type and print orientation, the duplexer provides
four types of binding.
1
Press [Menu].
2
Press ? or @ repeatedly until Paper
Handling > appears.
3
Press @.
4
Press ? or @ repeatedly until >Duplex
Mode appears.
5
To activate duplex printing, press [OK]. A
blinking question mark (?) appears.
6
Press ? or @ to display the desired binding mode. The message display
toggles through the following:
Off (default)
Short edge bind
Long edge bind
7
When the desired binding mode is displayed, press [OK]. The binding
mode is set.
8
To exit the menu selection, press [Menu].
Portrait, long-edge
Landscape, long-edge
Portrait, short-edge
Landscape, short-edge
Paper Handling >
>Duplex Mode
Off
>Duplex Mode
?Off
To Next Page
Loading...
