14
MP (Multi Purpose) Tray
The MP tray can be used for feeding non-standard size paper, labels, cards, envelopes, and
transparencies, etc., in addition to the normal paper sizes accommodated by the paper cas-
settes.
1
Open the MP tray on the right side of the
printer as shown in the figure.
2
Adjust the paper guides on the MP tray
by sliding them to the desired paper size
position. Standard paper size label is
attached to the MP tray.
3
Align the paper with the paper guides
and insert it as far as it will go.
4
Select the MP tray mode – cassette or
first. For details, see
Operation Guide
in
the CD-ROM.
5
If you have selected cassette mode, select
the paper size and media type for the MP
tray. For details, see
Operation Guide
in
the CD-ROM.
Printing will be made on the paper
surface facing up.
HUFPKPUVCNNDQQMࡍࠫ㧞㧜㧜㧟ᐕ㧝㧝㧝㧤ᣣޓἫᦐᣣޓඦᓟ㧟ᤨ㧝㧜ಽ
To Next Page
Loading...
