1-4-12
FS-9120DN/9520DN
U002 Initializing data for engine controller
Description
Initializing the backup RAM for engine controller to return to the original settings.
Purpose
Used to return the machine settings to initial settings.
Method
1. Enter the maintenance mode and press the or key to display "U002".
2. Press the ENTER key. "?" will be displayed.
>Default Data
[U002] Set?
3. Press the ENTER key. Each setting will be initialized.
To keep the setting, press the CANCEL key.
U005 Printing without paper
Description
Switches to the machine operation control without paper
Purpose
To check the overall operation of the machine.
Method
1. Enter the maintenance mode and press the or key to display "U005".
2. Press the ENTER key. "?" will be displayed.
3. Press the or key to turn on or off printing without paper.
>Print Without
[U005] Paper?Off
4. Press the ENTER key. The setting is set.
To keep the setting, press the CANCEL key.
U030 Checking motor operation
Description
Drives each motor.
Purpose
To check the operation of each motor.
Method
1. Enter the maintenance mode and press the or key to display "U030".
>Drive Motors >
[U030]
2. Press the key to display the submenu screen.
3. Press the or key to select the motor to activate.
Display Operation
FEED Motor Paper feed motor operates
MAIN Motor Drive motor operates
EJECT MT (FW) Eject motor rotates forward
EJECT MT (REV) Eject motor rotates in reverse
4. Press the ENTER key. "Execute" will be displayed and operation will start.
>>FEED Motor
[030.1] Execute
5. To stop operation, press the ENTER key or the CANCEL key.
(3) Contents of maintenance mode items
Maintenance
Description
item No.
To Next Page
Loading...
Need help?
General
