FS-9120DN/9520DN
1-4-25
Maintenance
Description
item No.
U252 Setting the destination
Description
Switches the operations and screens of the machine according to the destination.
Purpose
To restore the destination setting to the default setting after the board is replaced or the like.
Method
1. Enter the maintenance mode and press the or key to display "U252".
>Destination >
[U252]
2. Press the key to display the submenu screen.
3. Press the or key to select the destination.
Display Description
Metric Metric system region setting
Inches Inch system region setting
4. Press the ENTER key. "?" will be displayed.
>>Metric ?
[U252.1]
5. Press the ENTER key. The value is set, and the status at power on is automatically restored.
To keep the preset value, press the CANCEL key.
U274 Setting LSU type
Description
Sets the LSU type in accordance with the number of the label stuck on the LSU. Sets the output power of LSU
according to the types of machine.
Purpose
To set when the LSU is replaced.
Method
1. Enter the maintenance mode and press the or key to display "U274".
>Set LSU Type
[274.1] #
2. Press the key to display the submenu screen.
3. Press the or key to select an item for which the preset value is to be changed.
Display Description Setting range Initial setting
LSU Type LSU type 0 to 2 1
LSU Power LSU output power Low or High Low/High*
*: FS-9120DN/9520DN
4. Press the ENTER key.
5. Press the or key to change the preset value.
6. Press the ENTER key. The value is set.
To keep the preset value, press the CANCEL key.
To Next Page
Loading...
Need help?
General
