Kyocera FS-C1020MFP+ - Making Enlarged or Reduced Copies

Making Enlarged or Reduced Copies
This section describes how to specify the reduction or enlargement ratio for the current job.
Scaling
There are two ways to set the scaling ratio: using a preset ratio or manually specifying a
customized ratio.
• Preset ratio
CES103
50%, 71%, 82%, 93%, 122%, 141%, 200%, 400%
50%, 65%, 78%, 93%, 129%, 155%, 200%, 400%
• Custom ratio
CES106
25% to 400% in 1% increments.
Use this procedure to specify the reduction or enlargement ratio for the current job.
4. Using the Copier Function
154