Kyocera FS-C1020MFP+ - Scanner Setting Parameters

Scanner Setting Parameters
This section describes the scanner setting parameters.
Scan Size
Specifies the scanning size according to the size of the original.
Default: [A4], [8 1/2 × 11]
• 8 1/2 × 14, 8 1/2 × 11, 8 1/2 × 5 1/2, 7 1/4 × 10 1/2, A4, B5, A5, Custom Size
B&W Scanning Mode
Specifies the scanning mode for black-and-white scanning using the control panel.
Default: [Halftone]
• Halftone
The machine creates 1-bit black-and-white images. Images contain only black and white
colors.
• Grey Scale
The machine creates 8-bit black-and-white images. Images contain black and white, and
intermediate gray colors.
Max. E-mail Size
Specifies the maximum size of a file that can be sent by e-mail.
Default: [1 MB]
• 1 MB
• 2 MB
• 3 MB
• 4 MB
• 5 MB
• No Limit
Density
Specifies the image density for scanning originals.
Default:
• (Lightest)
•
•
•
• (Darkest)
7. Configuring the Machine Using the Control Panel
252