Kyocera FS-C1020MFP+ - 8 Configuring the Machine Using COMMAND CENTER; Using COMMAND CENTER

8. Configuring the Machine Using
COMMAND CENTER
You can check the machine's status or change its settings by accessing the machine directly using
COMMAND CENTER.
Using COMMAND CENTER
• Some items can also be configured using the control panel.
Available operations
The following operations can be performed remotely using COMMAND CENTER on a computer:
• Displaying the machine’s status or settings
• Configuring the machine's settings
• Registering the scan and fax destinations
• Registering the fax Special Senders
• Configuring the user restriction settings
• Configuring the network settings
• Configuring the IPsec settings
• Printing reports
• Setting the administrator password and e-mail address
• Resetting the machine's configuration to the factory default
• Creating backup files of the machine's configuration
• Restoring the machine's configuration from backup files
• Configuring the machine's date and time
• Configuring the machine's Energy Saver mode setting
Supported Web browsers
• Internet Explorer 6 or later
• Firefox 3.0 or later
• Safari 3.0 or later
• To operate the machine via COMMAND CENTER, you must first configure the machine's TCP/IP
settings.
297