• For details about installing printer drivers for USB connection, see Driver Installation Guide.
Connecting with a Network Cable
Follow the procedure below to connect the machine to a computer through a network.
Prepare the hub and other network devices before connecting the 10BASE-T or 100BASE-TX cable to
the machine's Ethernet port.
• Do not connect the Ethernet port of the machine to a network that may supply excess voltage,
such as a telephone line. Doing so may result in fire or electric shock
• Use shielded Ethernet cable. Unshielded cables create electromagnetic interference that could
cause malfunctions.
• The Ethernet cable is not supplied with this machine. Select your cable according to the network
environment.
Connecting the Machine
63
To Next Page
Loading...
