Kyocera FS-C1020MFP+ - Scanning from a Computer; Settings You Can Configure in the TWAIN Dialog Box

Scanning from a Computer
Scanning from a computer (TWAIN scanning) allows you to operate the machine from your computer
and scan originals into your computer directly.
TWAIN scanning is available with both USB and network connections.
1. Run a TWAIN-compatible application.
2. Select this machine with in the application to display the TWAIN dialog box.
• For more information, see the TWAIN driver Help or the manual for your application.
• The machine supports WIA scanning, an additional method of scanning originals from your
computer, for USB connection. WIA scanning is possible if your computer is running a WIA-
compatible application. For more information, see the manual for your application.
Settings You Can Configure in the TWAIN Dialog Box
This section describes the settings you can configure in the TWAIN dialog box.
CES194
1
2
3
4
5
6
7
1. Scanner:
Select the scanner you want to use. The scanner you select becomes the default scanner. Click [Refresh] to
discover all available scanners connected via USB or the network.
Scanning from a Computer
187