Kyocera FS-C1020MFP+ - Using the Machine Again after It Has Been Inactive for a Long Period

3. Pull the opening lever on the front cover, and then carefully lower the front cover.
CES141
4. Lower the fusing unit lever.
CES257
5. Close the front cover with both hands carefully.
CES142
• This step is not necessary if the machine's power switch is on but the machine has been inactive for
a long time.
Using the Machine Again After It Has Been Inactive for a Long Period
Use the following procedure to start using the machine again after it has been inactive for a long period.
10. Maintenance
412