Printing Lists/Reports
Click [Print List/Report] to display the page for printing reports. Then, select an item and click [Print] to
print out information for that item.
Print List/Report
Item Description
Configuration Page Prints general information about the machine and its current configuration.
Fax Journal Prints a fax transmission and reception journal for the last 50 jobs.
Fax TX/RX Standby File
List
Prints a list of fax jobs remaining in the machine's memory to be printed,
sent, or forwarded.
Quick Dial Destination
List
Prints a list of Quick Dial entries.
Fax Speed Dial
Destination List
Prints a list of Speed Dial entries.
Scanner Destination List Prints a list of scan destinations.
Scanner Journal Prints a scanner journal for the last 100 Scan to E-mail, Scan to FTP, and
Scan to Folder transmissions.
Maintenance Page Prints the maintenance page.
• Reports cannot be printed via COMMAND CENTER if other jobs are printing. Before printing
reports, confirm that machine is not printing.
• Reports will be printed using the tray set as the priority tray for the fax function.
• Reports will be printed on A4 or Letter size paper. Load one of these sizes of paper into the tray
before printing reports.
8. Configuring the Machine Using COMMAND CENTER
336
To Next Page
Loading...
