Item Description
Automatic POP Select whether to automatically connect to the POP3 server to check for
new e-mails or not. If this setting is enabled, the connection will be made at
an interval specified in [POP Interval (minutes)].
POP Server: E-mail
Reception Setting
Select whether to leave or delete e-mails in the POP3 server after receiving
them.
[No]: Delete e-mails from the server after receiving them.
[Save E-mail]: Leave e-mails on the server after receiving them.
[Save Only Error Info]: Delete e-mails that are successfully received from
the server only.
POP Interval (minutes) Specifies how many minutes the machine waits between automatic
connections to the POP3 server to acquire new e-mails (2 to 1440
minutes).
• For details about the DNS settings, see p.323 "Configuring the DNS Settings".
• For details about the administrator settings, see p.338 "Configuring the Administrator Password
and E-mail Address".
8. Configuring the Machine Using COMMAND CENTER
330
To Next Page
Loading...
