EasyManua.ls Logo

Kyocera FS-C1020MFP+ - Initial Setup

Kyocera FS-C1020MFP+
444 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
The supplied power cord is for use with this machine only. Do not use it with other appliances.
Doing so could result in fire or electric shock.
It is dangerous to handle the power cord plug with wet hands. Doing so could result in electric
shock.
Be sure to push the plug of the power cord fully into the wall outlet. Partially inserted plugs
create an unstable connection that can result in unsafe buildup of heat.
If this machine is not going to be used for several days or longer at a time, disconnect its power
cord from the wall outlet.
When performing maintenance on the machine, always disconnect the power cord from the
wall outlet.
Make sure that the power cord is plugged securely into the wall outlet before turning the power on.
Make sure that the power is off when plugging or unplugging the power cord.
Do not turn off the power switch until initializing is completed. Doing so results in malfunction.
1. Plug in the power cord.
CES066
2. Insert the plug of the power cord into the wall socket securely.
Installing the Machine
53

Table of Contents

Related product manuals