Kyocera FS-C1020MFP+ - Connecting the Machine

Current job Job that you want to execute simultaneously
Receiving a LAN-Fax job from
a computer
• Copying
• Scanning (except for TWAIN scanning)
• Printing
• Fax memory reception
• Fax memory transmission
• Fax immediate printing
• Printing a fax received in the machine's memory
• Internet Fax reception
• Internet Fax transmission
• LAN-Fax transmission
LAN-Fax transmission
• Copying
• Scanning (except for TWAIN scanning)
• Printing
• Internet Fax reception
• Internet Fax transmission
• Receiving a LAN-Fax job from a computer
*1
Printing starts after scanning is finished if [Gradation:] is set to [Standard] or [Fine] (PCL printer driver), or
when printing from the PostScript 3 printer driver.
*2
Scanning is not possible if [Gradation:] is set to [Standard] or [Fine] (PCL printer driver), or when printing
from the PostScript 3 printer driver.
*3
Fax transmission is not possible if [Gradation:] is set to [Fine] (PCL printer driver), or when printing from the
PostScript 3 printer driver.
*4
Printing may be canceled if [Gradation:] is set to [Standard] or [Fine] (PCL printer driver), or when printing
from the PostScript 3 printer driver.
*5
Fax printing may take longer than normal if you scan using the control panel at the same time, especially
when scanning multiple pages using the exposure glass.
*6
Internet Fax transmission will not begin until Internet Fax reception is completed.
*7
Connection to the POP3 server cannot be performed during Internet Fax transmission.
• If you try to use a function that cannot be performed simultaneously, you will hear a beep sound
from the machine or see a failure message pop up on your computer screen. In this case, try again
after the current job is finished.
Installing the Machine
61