Kyocera FS-C2626MFP

2M8/2M9
1-2-5
5. Remove tape A and pad.
6. Move the lock lever to the position of
release.
* : When turning on power if the lock lever
is not released, the error message is
displayed.
7. Remove two tapes B.
8. Remove the protection film.
9. Close the DP.
Figure 1-2-6
10. Remove two tapes.
Figure 1-2-7
Tapes B
DP
Tape A
Pad
Protection film
Lock lever
Tape
Tape