Device Settings
Creating a Combined Source List
You can combine the Source and Media type lists in the Basic tab to make
one Source list.
1
In Device Settings > Compatibility Settings, select Combine source and
media type lists.
2
Click OK in the Compatibility Settings and Properties dialog boxes.
You can restore all the options in Compatibility Settings to the default by
clicking Reset.
Removing a Plug-in
You can remove an installed plug-in from the driver. If removed, the plug-in
features do not appear in the driver interface.
Note: To remove the Output to PDF module, PDF must not be selected in
the PDL Settings dialog box.
1
In Device Settings, click Kyocera logo > Plug-in.
2
Select a plug-in module from the list and click Delete, then Yes.
3
Click OK in all dialog boxes.
User Guide
2-17
To Next Page
Loading...
