Imaging
3
Select Properties.
4
Select the Color Management tab.
5
Click Add.
6
In the Add Profile Association dialog box, select a color profile from the list
and click Add.
7
In the Color Management tab, select Manual.
8
Select the desired color profile from the list and click Set as Default.
9
Click OK.
Adjusting Color
Color Adjustment enables you to customize the two color spaces in the driver
and save up to three custom groups. Color space changes can be made to red,
green, blue (RGB) levels or to hue, saturation and lightness (HSL).
1
In the Imaging tab, in Color mode, select Color (CMYK).
2
In the Adjustment list, select Custom 1, Custom 2, or Custom 3, if you have
already defined color settings. If you have not defined color settings, select Edit
to open the Adjustment Settings dialog box.
3
From the Custom color adjustment list, select Custom 1, Custom 2, or
Custom 3.
4
To open the Custom Color Adjustment dialog box, click Settings.
5
Select HSL (hue, saturation and lightness) or RGB (red, green, blue) to work
with as the color space.
6
Click the arrow buttons beneath the photograph to select one of three different
images. Different colors are emphasized in each of the photographs to aid in the
color adjustment process.
Adjusting HSL (Hue, Saturation, Lightness)
HSL controls adjust the full spectrum, brightness, contrast, and vividness of the
color.
1
Under Select color space, select HSL (hue, saturation and lightness).
2
Adjust the distribution and balance of hues.
For coordinated hue adjustment, from the Modify list select Master. Drag the
Hue slider to the right or left to increase or decrease the value between -180
and +180.
User Guide
6-9
To Next Page
Loading...
Need help?
General
Weight and Dimensions
