Imaging
For specific hue adjustment, from the Modify list select Red, Yellow, Green,
Cyan, Blue, or Magenta. Drag the Hue slider to the right or left to increase or
decrease the value between -10 and +10.
The upper color bar indicates the adjustment made when the slider is dragged,
or a value is typed in the box. The horizontal brackets around the upper color
bar show the range of the color bar affected by the adjustment.
The lower color bar provides a reference point to the color bar above it for Hue
Adjustment.
3
Drag each slider to adjust the Saturation, Lightness and Contrast between
-10 and +10. You can also type values in the boxes.
4
If you want to return all HSL settings to zero, click Reset.
5
Click OK to save the new HSL settings.
Adjusting RGB (Red, Green, Blue)
RGB adjusts only the relative values of the colors red, green, and blue.
1
Under Select color space, select RGB.
2
Under each bar, drag the slider to adjust the relative values of Red, Green, and
Blue between -10 and +10. You can also type values in the boxes.
3
If you want to return all RGB settings to zero, click Reset.
4
Click OK to save the new RGB settings.
Adjusting Grayscale
The Adjustment settings change the Brightness and Contrast of graphics.
These settings are useful if graphic images are printing too light, too gray, or too
dark. Text remains unaffected.
1
In the Imaging tab, in Color mode, select Black & White.
2
In the Adjustment list, select Custom.
A preview image in the Adjustment Settings dialog box illustrates any
brightness and contrast changes.
3
Drag the Brightness slider right to lighten, or left to darken the graphic images
of the print job.
You can also change brightness by entering a numeric value in the text box at
the right. The brightest setting is +100; the darkest is -100. Zero is the default
mid-level setting. Adjusting brightness is useful when graphic images are
printing too dark or too light.
4
Drag the Contrast slider right or left to increase or decrease proportion of light
to dark in the graphic images of the print job.
KX DRIVER
6-10
To Next Page
Loading...
Need help?
General
Weight and Dimensions
