Basic
The printer driver automatically overrides the application's Collate setting and
uses the printer driver setting. You can use the application's Collate setting by
clearing the Ignore application collation check box in the Compatibility
Settings dialog box accessed from Device Settings.
Printing Collated Documents
When printing multiple copies of a multiple page document, the printer can
assemble the pages of each copy in numerical order.
1
In the Basic tab, select the Collate check box.
2
Type or select the number of complete sets of the print job in the Copies box.
The document page count must not exceed the printer tray capacity.
3
Click OK to return to the Print dialog box.
4
Click OK to start printing.
Printing in Color, Black & White, and EcoPrint
The options in Color let you choose full-color printing or printing with black toner
only. EcoPrint makes print output appear lighter. The following color modes are
available:
Color (CMYK)
This mode prints full four-color text and graphics.
Black & White
This mode prints with black toner only, constraining all color settings.
EcoPrint makes the entire image, text and graphics, appear lighter in the
printed job. EcoPrint does not increase print speed.
Color, Black & White and EcoPrint also appear in the Quick Print tab and in
the Imaging tab. Changes in Quick Print, Basic, or Imaging tabs are
replicated to another tab if the same feature appears there.
Print Preview
After selecting driver settings, you can use Print preview to check the print job
before you proceed with printing. If you are satisfied with the preview, you can
print. Or you can cancel printing if you want to change driver settings.
Previewing a Print Job
You can see a print preview before printing.
1
Select desired driver settings in all tabs, or select a profile.
2
In the Basic tab, select Print preview.
3
Click OK in the Printing Preferences and Print dialog boxes.
4
When the Print preview dialog box appears:
User Guide
4-5
To Next Page
Loading...
Need help?
General
Weight and Dimensions
