Printing Basics
User Guide 3-3
6
In the Basic tab, click Page Sizes to open the Page Sizes dialog box. In the Select
page size list, select a page size for the print job. 6
7
Click OK to return to the Basic tab. Click OK to return to the Properties dialog box.7
For best results when printing on transparencies or recycled paper (the back side of
paper which has already been printed on), from the Media type list select the media
type. For further details, see Media Types on page 3-4.
The printing system automatically selects the paper size that matches the size
specified above. A message appears requesting you to load paper into the MP tray
if the proper paper size is not available.
8
Click the Source list to specify the paper cassette for printing.
9
Choose either Portrait or Landscape to match the document page orientation. You
can rotate the document 180 degrees by selecting the Rotated check box. 8
10
Click OK to return to the Print dialog box. 9
11
Click OK to start printing. 10
Print Sizes
This section describes how to print documents of different sizes than the original
document. The document image is adjusted to match the size you select. If you
would like to manually input the Scaling percentage, see Scaling on page 4-7.
1
In the Properties dialog box, from the Basic tab click Page Sizes. 1
To Next Page
Loading...
