What to do if my Kyocera All in One Printer says 'Unable to copy. Please Add Toner'?
If your Kyocera All in One Printer displays 'Unable to copy. Please Add Toner', it means no toner remains. Replace the toner container to add toner.
How to adjust print darkness on Kyocera All in One Printer?
If your Kyocera All in One Printer's printouts are too dark: * If the machine is in Auto Density mode, set the correct density level. * If the machine is in Manual Density mode, use the Image Quality key to set the correct density level.
How to fix skewed images from Kyocera All in One Printer?
Skewed images from your Kyocera All in One Printer can be corrected by: * Ensuring originals are aligned with the original size indicator plates when placing them on the platen. * Aligning the original width guides securely before placing originals in the optional document processor. * Checking the position of the paper width guides to ensure the paper is loaded correctly.
Why is my Kyocera All in One Printer ejecting blank sheets?
If your Kyocera All in One Printer is ejecting blank sheets, check if the originals are loaded correctly. When placing originals on the platen, place them face-down and align them with the original size indicator plates. When placing originals in the optional document processor, place them face-up.
General| Print Technology | Laser |
|---|---|
| Type | Monochrome |
| Print Resolution | 600 x 600 dpi |
| Copy Resolution | 600 x 600 dpi |
| Scan Resolution | 600 x 600 dpi |
| Duplex Printing | Manual |
| Memory | 64 MB |
| Functions | Print, Copy, Scan |
| Print Speed | 18 ppm |
| Copy Speed | 18 cpm |
| Paper Capacity | 250 sheets |
| Connectivity | USB 2.0 |
| Supported Operating Systems | Linux |
To Next Page
