KMnet Viewer 5.2 36
1. Click Delete all, then click Yes to confirm.
2. Click OK in the Advanced dialog box.
3. Click Close in the Virtual Mailbox dialog box.
Adding a New Virtual Mailbox
You can create a new virtual mailbox on the hard disk. A maximum of
255 virtual mailboxes is supported.
1. Select a device.
2. Select Device > Virtual Mailbox. The Virtual Mailbox
dialog box opens.
3. Click New Mailbox.
4. Enter a new ID, name, new password, confirm the password,
and click OK. The same name cannot be used for two virtual
mailboxes.
Editing a Virtual Mailbox
You can set the name and password of a virtual mailbox stored on
the hard disk. If you click Refresh All with one virtual mailbox
selected, all virtual mailboxes are refreshed.
1. Select a device.
2. Select Device > Virtual Mailbox. The Virtual Mailbox
dialog box opens.
3. Select a virtual mailbox and click Properties. The
Properties dialog box opens.
4. Type a new Name, and type a password (from 1 to 65535).
In Confirm new password, type the password again.
5. Click OK.
Device Notification Settings
The Notification feature is used to inform users of changes in the
status of the printing device. There are three types of notifications
To Next Page
Loading...
