KMnet Viewer 5.2 41
Settings. The Authentication Settings dialog box opens.
2. At the bottom of the dialog box select the Permit jobs with
unknown IDs check box. Click OK to save all your settings.
If you want to restrict the device with a user login, clear the Permit
jobs with unknown IDs check box. In the printer driver for the
device, you must also click Device Settings > Administrator, and
select User login. Type the user name and password for a specific
user, or choose to have the device prompt for the user name.
Enabling Simple Login
You can enable simple login for a printing system.
1. In any Device view, select a printing system.
2. Click Device > Advanced > Authentication Settings. If
authentication is required, enter a login and password.
3. Select the Simple login check box.
4. Click OK.
Setting ID Card Login
You can select ID card login settings for your device. ID card login
varies by model and is available when an ID card authentication kit is
activated. Support for this feature varies by model.
1. In any Device view, select a printing system.
2. Click Device > Advanced > Authentication Settings. If
authentication is required, enter login and password
information.
3. Under ID card login settings, select Allow keyboard login
to enable login. Clear the check box to disable this feature.
4. Select Password login to require a password. Clear the
check box to disable this feature
Network Groups
You can add, delete, edit, authorize, and search for groups. The
maximum number of groups that can be added to the list is 20.
To Next Page
Loading...
