KMnet Viewer 5.2 64
6 Multi-Set
Multi-Set lets you send configuration parameters to multiple devices
simultaneously.
Setting Multiple Devices
To start the Multi-Set wizard, follow these steps:
1. In the device list, select the devices that will receive settings
by pressing the Ctrl key, and clicking on the devices. You
can also select groups of devices by pressing the shift key
and clicking the first and last of adjacent devices in the list.
2. On the menu bar at the top of the screen, click Device >
Advanced > Set Multiple Devices. Alternatively you can
open the wizard by right-clicking on one of the selected
devices in the device list. In the context menu, click
Advanced > Set Multiple Devices.
3. In the Device Group page, the application has filtered the
selected devices by those Multi-Set supports. The devices
are organized by product group.
Select one group to apply settings to, and click Next.
Selecting Settings in Multi-Set
You can select available settings on the Settings page of the Multi-
Set wizard.
Note: If local authentication is on, an administrator must type a
Login user name and password in Device > Communication
Settings > Login. All settings and passwords for the source and
destination devices must be correct in Communication Settings for
a successful Multi-Set completion.
The following options may vary on the Settings page, depending
upon the destination device:
Device System Settings
Basic device settings including operation panel language, timers,
and security options including panel and interface locks. Some
functions may require the printing system to be restarted.
Device Network Settings
To Next Page
Loading...
