KMnet Viewer 5.2 40
2. In the menu bar at the top of the screen, click Device >
Advanced > Authentication settings.
3. Click Network user properties.
4. If you want to get the network user properties, select the
Obtain network user properties check box.
5. Type the server name in the Server name text box. The
maximum is 64 characters.
6. Select the Port number from the list. Available port numbers
range from 1 to 65535.
7. Select the Search timeout (seconds) from the list. Available
numbers of seconds range from 5 to 255.
8. Select Encryption from the list. The LDAP encryption can be
saved to SSL/TLS, STARTTLS, or it can be set to Off.
9. The device uses the Acquisition of user information
settings for search and retrieval of login user information
from the LDAP server.
Type a valid username in the Name 1 text box. The
maximum length is 32 characters.
Type another valid username in the Name 2 text box. The
maximum length is 32 characters.
Type a valid e-mail address in the E-mail address text box.
The maximum length is 32 characters.
10. Click OK, and click OK again in the Authentication Settings
dialog box to save your settings and close the dialog box.
Permitting Jobs with Unknown IDs
If you want a device to have no user restrictions and accept print jobs
without a user login and password, you can select the Permit jobs
with unknown IDs check box. The check box is cleared by default.
1. Select a device in the device list. In the menu bar at the top
of the screen, click Device > Advanced > Authentication
To Next Page
Loading...
