2LK/2LN/2LM/2LC-2
1-3-41
U051 Adjusting the deflection in the paper
Description
Adjusts the deflection in the paper at the registration roller.
Purpose
Make the adjustment if the leading edge of the copy image is missing or varies randomly, or if the
copy paper is Z-folded.
Method
1. Press the start key.
2. Select the item to be adjusted.
*: 55 ppm model only.
Adjustment
1. Press the system menu key.
2. Place an original and press the start key to make a test copy.
3. Press the system menu key.
4. Select the item to be adjusted.
[Paper Loop Amount]
Change in value per step: 1.0 mm
(L): When large size paper is used (218 mm or more in width of paper).
(S): When small size paper is used.
Item No. Description
Display Description
Paper Loop Amount Deflection adjustment
Paper Loop Amount B/W* Deflection adjustment in black and white mode
Paper Loop Amount 3/4 Deflection adjustment at 3/4 times of line speed
Display Description
Setting
range
Initial setting
30ppm 35ppm 45ppm 55ppm
MPT(L) Paper feed from MP tray -30 to 20 1 1 -5 -7
MPT Half(L) Paper feed from MP tray -30 to 20 1 1 0 -1
Cassette(L) Paper feed from cassette -30 to 20 1 1 -5 -7
Cassette
Half(L)
Paper feed from cassette -30 to 20 1 1 0 -1
Duplex(L) Duplex mode (second) -30 to 20 1 1 -5 -7
Duplex
Half(L)
Duplex mode (second) -30 to 20 1 1 0 -1
MPT(S) Paper feed from MP tray -30 to 20 1 1 -5 -7
MPT Half(S) Paper feed from MP tray -30 to 20 1 1 0 -1
Cassette(S) Paper feed from cassette -30 to 20 1 1 -5 -7
Cassette
Half(S)
Paper feed from cassette -30 to 20 1 1 0 -1
Duplex(S) Duplex mode (second) -30 to 20 1 1 -5 -7
Duplex
Half(S)
Duplex mode (second) -30 to 20 1 1 0 -1
To Next Page
Loading...
