Kyocera TASKalfa 3050ci - Page 136

2LK/2LN/2LM/2LC-2
1-3-42
U051 [LSU Out Top B/W]
Change in value per step: 1.0 mm
(L): When large size paper is used (218 mm or more in width of paper).
(S): When small size paper is used.
[LSU Out Top 3/4]
Change in value per step: 1.0 mm
(L): When large size paper is used (218 mm or more in width of paper).
(S): When small size paper is used.
5. Change the setting value using the +/- keys or numeric keys.
For output example 1, increase the value. For output example 2, decrease the value.
The greater the value, the larger the deflection; the smaller the value, the smaller the deflec-
tion.
Figure 1-3-7
6. Press the start key. The value is set.
Completion
Press the stop key. The indication for selecting a maintenance item No. appears.
Item No. Description
Display Description
Setting
range
Initial setting
30ppm 35ppm 45ppm 55ppm
MPT(L) Paper feed from MP tray -30 to 20 1 1 -5 -8
Cassette(L) Paper feed from cassette -30 to 20 1 1 -5 -8
Duplex(L) Duplex mode (second) -30 to 20 2 2 -5 -8
MPT(S) Paper feed from MP tray -30 to 20 1 1 -5 -8
Cassette(S) Paper feed from cassette -30 to 20 1 1 -5 -8
Duplex(S) Duplex mode (second) -30 to 20 2 2 -5 -8
Display Description
Setting
range
Initial setting
30ppm 35ppm 45ppm 55ppm
MPT(L) Paper feed from MP tray -30 to 20 1 1 -2 -2
Cassette(L) Paper feed from cassette -30 to 20 1 1 -2 -2
Duplex(L) Duplex mode (second) -30 to 20 1 1 -2 -2
MPT(S) Paper feed from MP tray -30 to 20 1 1 -2 -2
Cassette(S) Paper feed from cassette -30 to 20 1 1 -2 -2
Duplex(S) Duplex mode (second) -30 to 20 1 1 -2 -2
Original Copy
example 1
Copy
example 2