Kyocera TASKalfa 3050ci - Page 176

2LK/2LN/2LM/2LC-2
1-3-82
U108 Setting separation shift bias
Description
Adjusts output of separation shift bias and ON/OFF timing.
Purpose
To set when the separated malfunction of the paper occurs.
Method
1. Press the start key.
2. Select the item to be set.
Setting: [Output]
1. Select the item to be set.
2. Change the setting value using the +/- or numeric key.
3. Press the start key. The value is set.
Item No. Description
Display Description
Output Adjusting the separation shift bias output
Output 3/4 Adjusting the separation shift bias output
Output B/W Adjusting the separation shift bias output in black/white mode
Timing Adjusting the ON/OFF timing with paper position
Display Description
Setting
range
Initial
setting
Light 1st Separation shift bias for the first side on
paper with thickness 52 to 59 g/m
2
0 to 255 20
Light 2nd Separation shift bias for the second side
on paper with thickness 52 to 59 g/m
2
0 to 255 20
Normal 1st Separation shift bias for the first side on
paper with thickness 60 to 75 g/m
2
0 to 255 20
Normal 2nd Separation shift bias for the second side
on paper with thickness 60 to 75 g/m
2
0 to 255 20
Add Normal
Lead
Addition value for leading edge on paper
with thickness 76 to 105 g/m
2
-127 to 127 0
Heavy/OHP Separation shift bias for transparencies
or paper with thickness 106 to 300 g/m
2
0 to 255 0